1/8 Mod Electric Late Model


Section 1:
Chassis:
1-1 Must be 1/8 production based 4 WD buggy drive train.(Losi,Ofna,X-Ray and so on)
1-2 No offsetting a-arms or narrowing of a-arms
1-3 Must have dog bone center drive train, no on-road drive trains.
1-4 No interchanging of manufactures drive train parts. (Losi must use Losi drive train an so on)
1-5 No third channel devices(one wheel brakes, wing adjustments and so on)
1-5 Wheel base: 12 5/8" to 13"
1-6 Width: 13" max. - 11 1/4" min.
1-7 Any and all parts must be flush or in side the tread width. 1/8 tolerance.
1-8 All chassis and tires must remain inside the body.
1-9 No metal or carbon fiber front bumpers.
1-10 Must have foam on the front bumper.

______________________________________________________________________

Section 2:
Motors, Batteries & Speedo

2-1 2250 KV or less brushless motor
All motors must be 4 pole or less
All motors must have factory marked kv rating on them!
Any motor that don't have this will not be legal!

2-2 Open Speedo

2-3  Any hard case 3 cell lipo

Must have hobby grade connector!
Must be hard case lipo's!
ROAR charge limit! 4.22 per cell max

______________________________________________________________________


Section 3:
Bodies:
3-1 Molded one- piece bodies only.
3-2 No additional wings, flaps, spoilers, wickers, vents or doohickeys will be allowed  except what's in
sections 4 & 5
3-3
A hole or holes for motor cooling
3-4 Decking is allowed
3-5 There will be no metal body parts of any kind.
3-6 All bodies must be approved.

Approved Body list:
C&M 2011 "Assassin"
C&M-2009 "Atomic"
Losi# losa8096
Ofna# OFN34046
RJ Speed# 1015 & 1030
A+ one piece
2009 Stalker
2010 Stalker SS
2010 Onstat LM
2013 Onstat B-2 Bullet 2
Mach 1
2015 Mach 1

______________________________________________________________________

Section 4:
Side Dam specs:
4-1 Running a Side Dam is the tracks choice.
4-2 Side dam front leading edge must be at least 4" from center of left front spindle with the wheels straight.
4-3 Side dam can be 5" tall from deck at it's highest point, and cannot extend past rear spoiler.
4-4 Must have two tethers at least 8" apart.
4-5 Side dam must be on left side!

______________________________________________________________________

Section 5:
Rear Spoiler Specs:
5-1 Rear spoiler can only be as wide as the body at the rear quarter panels.
5-2 Rear spoiler 3" max from deck.
5-3 The end caps must be a triangle shape.(see template) You may have one fin on the spoiler and two side
caps.
The third fin must also be the same dimension as side cap.
It can be located anywhere on the spoiler between the two side caps. The fin must be in line with the side caps
on the front leading edge.

______________________________________________________________________

Section 6:
Wheel & Tire Specs:
6-1 Tracks choice on which tires are legal (Foam or Rubber)

6-2 All wheels must be 17mm buggy based.

Foam tire specs:
6-3 Max tire diameter- 106mm    Max tire width- 46mm

Spec rubber tires:
6-4 There will not be any grooving or sipping of the rubber tires.
6-5 Any street tread type 1/8 rubber tire.
6-6 Traction compounds are legal.

______________________________________________________________________

Section 7:
Weight:
7-1 8 lb. At any time
______________________________________________________________________

Section 8:
Tracks:
8-1 The track has final say on rules enforcement!

______________________________________________________________________

Section 9:
9-1 The DLMRA is not responsible for any actions by tracks or racers!

______________________________________________________________________

Section 10:
10-1 The DLMRA reserves the right to change any specifications at anytime in the fairness of the hobby!